A: Signal energy is lost as heat due to the resistance of the conductor, the dissipation factor of the dielectric, and other factors related to the material quality of the coaxial cable. Cable attenuation is a measure of the loss per unit length of the coaxial cable. Higher - frequency signals generally suffer greater attenuation.

A: When routing coaxial cables, factors such as the bending radius, maximum load, and environmental conditions should be considered. The cable should be routed in a way that avoids excessive bending and damage, and meets the installation requirements of the specific environment.

A: Coaxial cables are widely used in television broadcasting to transmit TV signals from the station to receivers. They are also used in computer networks to connect devices for data exchange, and in mobile communications to support wireless communication such as mobile phone calls and data transmission.

A: A coaxial cable has a data transmission speed of 10 Mbps. Compared to twisted pair cables, this is 80 times the transmission capacity.

A: Coaxial cables offer good EMI resistance and have a network bandwidth and throughput capacity as high as 10 Mbps. They're durable, economical, and typically simple to install and wire.

A: Certain coax cables are rated for outdoor installation, like running to an external cable box or antenna above or underground. However, coaxial cable used for outdoor installations requires extra insulation for sufficient wire protection and smooth signal transmission.

A: On the cable jacket, there's a series of imprinted numbers and letters. This code denotes the cable model, its rating, which manufacturer produced it, and more. You can also examine the cable's sleeve end to see if it features a single pin (indicating an RF cable) or determine the type based on its application.

A: Installing coaxial cable can range from straightforward to challenging, depending on the complexity of the installation. For simple tasks like connecting a TV to a nearby outlet, it's quite manageable. However, routing wires through walls or installing new connectors can be more complex and might require some technical know-how.

A: Coaxial cable is commonly used for transmitting cable TV, internet, and satellite signals. It's designed to carry high-frequency electrical signals with low losses and is a staple in most home entertainment and communication systems.

A: Coaxial cable should be routed to avoid sharp bends and physical damage. It's best to run the cable along the baseboards or through walls, using proper clips or staples to secure the wire. Use appropriate raising plates and connectors to ensure a neat and professional finish when routing through walls.